- 7 -
2.12.3 Refresh the circulating water in one month; use purified water or medical
distilled water.
Ⅲ
.
Operation Instruction
3.1 Before starting the machine
3.1 Accessories connecting
：
3.1.1 Connect the handle and filters:
3.1.1.1. Put the E-light handle on the hanger
3.1.1.2. Connect the E-light handle to the connecting port on the back board of the
machine tightly.
3.1.2 Check the water holes of the backboard, make sure the water outlet hole is
plugged well.
3.2 Water infusing:
3.2.1 Connect the funnel with the affussion and open the overflow hole
3.2.2 infuse water till water spill out from the overflow hole continously
3.2.3 Take out the funnerl and take back the cap of the overflow hole .
3.3 Checking
3.3.1 Make sure there is no water leaking;
3.3.2 Make sure there is no moisture or wet for electricity connecting parts;
3.3.3 Make sure the key switch is in the off position;
3.3.4 Make sure the emergency stop switch is in the on position.
3.4 Starting the equipment
3.4.1 Connect the power cord, turn on the key switch;
3.4.2 Double confirm there is no leaking of water circulation, fold the protective
cover by turning it right.
3.5. Debugging
3.5.1. Make sure water and electric circuit is correct connected; then turn on
the power to start the machine.
3.5.2. Turn on the master power switch on the backboard;
3.5.3.Turn on the emergency switch (clockwise turn) in the front side of the
mainframe
3.6. Operation
Enter operation condition after debugging and no abnormalities found.
3.6.2. Treatment Program Selecting Interface
Welcome Interface
