background image

- 6 -

Emit 2 or 3 light spots in the bottom of ears in safe parameter, observe for 3

minutes.

Effect: do not continue to operate if there is an allergic phenomenon.

2.8 Operation

Carry on the operation with a suitable parameter to the patient.

ATTENTION:

2.8.1 Inform the patient that there will be a slight pricking in operation before
operating, to avoid panic.
2.8.2 Start the operation with a low energy grade; adjust the parameters in operating
while asking the feeling of the patient.

2.8.3 Move the light spot by one spot overlapping the upper 1/3 part of the previous

spot.
No emitting one area repeatedly, otherwise may cause inflaming or burns.
2.8.4 The handpiece should touch the skin vertically, no over pressing or leaving the
skin.
2.8.5 Observing the reaction of skin while operating.
2.9 Cold compress

Keep gel coating for 20 minutes after operation ending; carry out cold compress

in obvious slight reddish reaction till reddish fading away.

2.10 Cleaning

Clean the gel with cold water, coat corresponding cosmetics.

2.11 Treatment Course

Skin Rejuvenation Program: 30-45 days/time

(4 times/course)

Hair Removal Program: 2-3months/time

(3times/course)

2.12

Special reminding

2.12.1 Ask the client before treatment: is there a allergic or not; is there a bad

reaction before for similar operation; fill the Client File concretely. Adjust the

parameters on the basis of full acquaintance concretely. Adjust the parameters on

the basis of full acquaintance of the condition of patient. Inform the patient the

possible reaction in operation before operating.

2.12.2 In large area treatment or long time continuous operating, the water inside

the equipment will warm up and the handpiece will be hot, interrupt the operation

to refresh the water or leave the water cool down to continue operating.

Summary of Contents for HR-BX001


















Reviews: