MyBinding Plockmatic BM 200, Installation Manual, Page: 48 / 53

1-43
Installation
31 January 2007
1.5.6 AUTO SET THICKNESS BRACKET
Auto set thickness bracket
1. Remove the rear cover on the Booklet Maker ( 1.3.3) (
x 5 ).
2. Install the Spacer pin [A], with the collar out.
NOTE: Install the Spacer pin’s on the rear side of the Booklet Maker.
3. Install the Auto set thickness bracket [B], and tighten it with the other Spacer
pin [C] with the collar in.
[A]
[B]
[C]
SQUAREFOLDER INSTALLATION
CAUTION
ONLY install spacer pin [A] and [C] finger tight.
Over tightening may break loose the screw from the Fold roller plate.
Booklet Maker, rear side view