MyBinding Plockmatic BM 200, Installation Manual, Page: 18 / 53

1-13
Installation
31 January 2007
1.3.5 CHANGING SPEED ON THE COLLATOR
BOOKLET MAKER INSTALLATION
1. Enter Collator program mode by pressing hidden button [A] and holding it until
all green LED’s goes out.
2. Press button [B] repeatedly until programmable setting No. 10 is displayed.
This is indicated when bin LED 10 [C] on the Collator display is lit. The correct
value for setting No. 10 should read
120 . If so, continue to step 5.
3. Press button [D] once to display the last digit. Press button [B] to change the
last digit.
Press button [D] to also display the middle digit. Press button [B] to change
the middle digit.
Press button [D] to also display the first digit. Press button [B] to change the
first digit.
4. Confirm changing setting No. 10 by pressing button [D]
[A]
[D] [B]
[C]
Continued on next page....