Page 6-8
© 2002General Binding Corporation
Operations Manual
Aquila
CAUTION: Do not stop the laminator before an item
has completely exited the pull rollers. Even a
momentary stop will cause a dwell line (heat line) on
the laminated item.
INFORMATION: Wrinkles may result if an attempt
is made to reposition an item once it has entered
the nip of the heat rollers.
INFORMATION: When feeding long items,
skewing may occur if the item is not fed into the
laminator straight. Use the feed guide to help prevent
this from happening.
INFORMATION: If the machine is not working,
always check that the safety shield is properly
closed, the feed table is properly installed and the
circuit breaker has not tripped before placing a
service call.
