Page 5-8
© 2002General Binding Corporation
Operations Manual
Aquila
5.5 Film alignment
The film supply shaft come with pre alignment holes on
the right side.
Aquila -
Has pre alignment holes for 9 in. (21 cm)
and 12 in. (31 cm) film widths.
1. Loosen the thumb screw on the right side core adapter.
2. Move to the corresponding hole to match the width of
your roll of film.
3. Tighten the thumb screw in the pre drilled hole.
Core adapters
Thumb screws
5.6 Tension knobs
Allows the operator to increase or decrease film web
tension as necessary to reduce curl and wrinkles. Refer
to Page 5-3,Adjusting film tension for more information
on tension.
To increase tension
1.
Turn the tension knob as indicated below.
Tension Knobs
To decrease tension
1.
Turn the tension knob as indicated below.
Tension Knobs
