35
11. STANDARD FOLDING OF NON-STANDARD PAPER
Standard folding of non-standard paper is the process of registering the length of non-standard
paper, setting the paper to a standard folding mode (six types) displayed on the control panel.
Non-standard paper
Paper other than the five standard paper specified by this unit LGR, LGL, LTR, STMT, and INV are called non-standard paper.
Standard paper size is the size of the paper stacked on the paper feed tray in the short edge feeding direction.
Standard paper which is stacked on the paper feed tray in the long edge feeding direction is considered non-
standard paper.
Note
Note
Standard folding
Six standard folding modes are available as shown below.
Single fold
Double fold
Irregular
accordion fold
Letter fold Accordion
fold
Brochure
fold
11-1. Paper Size Restrictions
Paper sizes which can be used are the sizes
within the range shown on the right.
( ) shows the minimum foldable size under
conditions given.
“15-3. Folding Small Size Paper” (
☞
p.46)
e
See
The paper sizes which can be used may vary
with the paper type, thickness, and printing
state.
Note
Note
Paper
Paper feed direction
Length: 7.2" (5.1") to 17.0"
Width: 5.1" (3.0") to 11.7"
11-2. Operation Procedure
Stack paper on the paper feed tray, and
set the paper feed guides.
1
Fixing screw
Paper feed guides
