hoW The CubeX WoRks
The CubeX uses your 3D model to create a 3D printed part .
•
To begin the process, design a part in a CaD package or download one from Cubify .com .
•
before the part can be printed, it must be opened into the CubeX software (CubeX software accepts both .stl and
.creation fi les).
• The CubeX Software creates a .cubex fi le, which the CubeX uses to build the part.
• Save the .cubex fi le onto your USB drive and plug the drive into your CubeX.
• The CubeX creates the model by pulling fi lament from the cartridge through the print jets via the delivery tubes. The
fi lament is then jetted through the print tip in a thin string of molten plastic. The print jet is accommodated by the print
plate, which lowers incrementally after each layer is deposited so a new layer can be drawn on top of the last, building the
part up .
aT a glanCe
Touchscreen
function button
memory stick usb port and PC connection usb port
Power supply
Cartridge dock 1
Cartridge dock 2
Cartridge dock 3
a
b
C
g
f
e
d
front
bottom
Inside
a
b
C
d
e
f
g
6
