![my home Carpi Assembly Instructions Manual Download Page 6](http://html.mh-extra.com/html/my-home/carpi/carpi_assembly-instructions-manual_1861523006.webp)
6
GB
Safety notes
Attention!
Small children could be strangled by pull
cords, chains, belts and strings for us-
ing the product, which are located on the
inside.
Keep strings out of the
reach of children to pre-
vent strangulation and
children from getting
entangled. The throat of
a child could get entan-
gled in a string.
Beds, children’s beds and furniture must
be set up away from strings for window
coverings.
Strings must not be linked with one an-
other. It must be ensured that the strings
do not get tangled and form a loop.
String retainer
Children could strangle themselves if this
system is not installed. You must careful-
ly read through the instructions and in-
stall the product accordingly. This system
must always be used to keep strings or
chains out of the reach of children.
Make sure that children do not put small
assembly parts in their mouth. They
could swallow the parts and choke.
Attention!
If, contrary to expectations, you would
like to return this article, please note that
this set can only be returned in its entire-
ty. We can only credit the correspond-
ing amount following return of the com-
plete product.
Thank-you for your understanding!
Product contents
Please begin by checking the contents of
the packaging (see
fi
gure
A
).
Blind cloth with loops
Depending on the size ordered, the
bottom bar may consist of several
parts:
A: Metal bar with individual
connecting pieces
B: Plastic rod with built-in connec-
tors
String handle
String retainer
Screw for the string retainer
Dowel for the string retainer
String clip or ring (already attached
to the cloth)
Window hook
Adhesion points
Changing the drawstring
side
Figure
B
+
C
show how to change the
position of the drawstring from the right
to left side.
1. Lay the blind cloth out on a table
or
fl
oor so that it is smooth and the
side with the rings, strings and loops
is facing up.
2. Loosen the string handle and the
four knots of the strings
a
to
d
(see
fi
gure
B
).
3. Swap string
a
with
d
and string
b
with
c
and tie the knot again on the
bottom end of the blind cloth. Attach
the string handle again (see
fi
gure
C
).