11
EN
M1.1.LA1201.NLFREN 14082018
2 Description
The fume extractor is designed to provide high efficiency filtration of fume generated during welding processes. Contaminants
are captured at the source through the extraction arm hood, clean air is then recirculated back to the working area. Figure 1
illustrates the basic operation and identifies the key components of the system.
When the pressure drop remains consistently, or the generated airflow can no longer suitable capture the weld fume, the filter
should be replaced.
The fume extractor is designed to provide high efficiency filtration of fume generated during welding processes.
contaminants are captured at the source through the extraction arm hood, clean air is then recirculated back to the
working area. figure 1 illustrates the basic operation and identifies the key components of the system.
When the pressure drop remains consistently above 4
̋
, or the generated airflow can no longer suitable capture the weld
fume, the filter should be replaced.
FIGURE 1�General Product Operation
Figure 1 Description
3 Technical specifications
Model
LA1201
Power supply
230 V / 50 Hz
Power
0.75 kW
Air flow
1200 m³/h
Sound level
72 dB(A)
Filter precision
0.1 µm
Arm length
2500 mm
Arm diameter
150 mm
Dimensions (l x w x h)
660 x 330 x 630 mm
Protection class
IP54
4 Installation
The fume extractor must be securely attached to the wall. It can be configured with multiple accessories to serve various
application requirements. Please refer to the proper section when installing your system.
4.1 Equipment off loading and inspection
Upon receipt of your unit, visually inspect for any shipping damage. A damaged carton indicates that the equipment may have
received rough handling during shipping that may have caused internal damage which could cause your system to not function
properly. Notify your delivery carrier and enter a claim if any damage is found.
It is recommended to leave the unit secured to the shipping skid if the use of a skid loader or fork truck is required to deliver the
unit to the point of delivery or installation. It is not recommended to pick the fume extractor up with a fork truck after it has been
removed from the skid.
copyrighted
document
- all
rights
reserved
by
FBC
