MVP D3 SERIES, Product Instructions

Page: 10 / 19

7
110 – 220 VAC Power Source –
Single Phase Only
Use Color coded terminals for High
Voltage Input to hook up inside D3
Site Power Available
Input Power Configuration for 110 – 220 VAC
High Voltage A/C Typical Conventions, single phase (USA wiring
convention):
Color Symbol Description
Black L Line Conductor, aka: “Hot” wire
White N Neutral Conductor
Green G Ground Wire, Chassis Ground
Input Specifications
Input Voltage: 90-264 VAC, (127-370 VDC)
Frequency Range: 47- 63 HZ
Input Current @ Full Load(Typ.): 1.8A@115VAC,
1.0A@230VAC
Recommended Min. Circuit Breaker: 6 A (type C)
Int. Electrical. Working Temp*: -20 ~ +70C
MTBF: 353.6Khrs min. MIL-HDBK-217F(25C)
Power Available to Camera & Accessories (max.)
MVP using 110/ 220 VAC input to S-Type enclosure
Using ONE Output Using BOTH Output Channels (12VDC & 24VDC)
Model 12 VDC Output OR 24 VDC
Heater Blower 25 watts or 25 watts 25 watts first channel, 5 watts on second Channel
Tornado 25 watts or 50 watts 25 watts first channel, 25 watts on second channel
Ring of Fire 25 watts or 25 watts 25 watts first channel, 5 watts on second channel
Run 110-220 VAC into D3 via
weatherproof wiring ports provided.
Connect wires to appropriate Color
Coded terminal shown here
! Use Single Phase Voltage Wiring Only !
* Shut off
all power before and during wiring & servicing!
*All Wiring must be done by a Qualified technician
*Observe all local and applicable electrical codes
Inside all D3-MVP is a Chassis similar to shown
All Wiring Connections are
to be made fully inside of D3
The MVP comes ready for 110-220VAC Input power