background image

LIMITED WARRANTY 

DOTWORKZ

,

 INC

.

 PRODUCTS

 

DOTWORKZ SYSTEMS INC.  

Warrants this Product to be free from defects in material or workmanship, as follows: 

PARTS 

LABOR

One (1) Year 

One (1) Year

One (1) Year 

One (1) Year

PRODUCT CATEGORY 

All Enclosures and Electronics 
Power Supplies 
 

The limited warranty stated in these product instructions is subject to all of the following terms and conditions:

1.

NOTIFICATION OF CLAIMS: WARRANTY SERVICE: 

If Purchaser believes that the Product is defective in material or workmanship, then a written notice 

with an explanation of the claim shall be given promptly by Purchaser to Dotworkz Systems but all claims for warranty service must be made within the warranty period. If after investigation 
Dotworkz Systems determines that the reported problem was not covered by the warranty, Purchaser shall pay Dotworkz Systems for the cost of investigating the problem at its then prevailing per 
incident billable rate. No repair or replacement of any Product or part thereof shall extend the warranty period as to the entire Product. The specific warranty on the repaired part only shall be in 
effect for a period of ninety (90) days following the repair or replacement of that part or the remaining period of the Product parts warranty, whichever is greater

2.

EXCLUSIVE REMEDY: ACCEPTANCE: 

Purchaser's exclusive remedy and Dotworkz System’s sole obligation is to supply (or pay for) all labor necessary to repair any Product found to be defective 

within the warranty period and to supply, at no extra charge, new or rebuilt replacements for defective parts

 

3.

EXCEPTIONS TO LIMITED WARRANTY: 

Dotworkz Systems shall have no liability or obligation to Purchaser with respect to any Product requiring service during the warranty period which is 

subjected to any of the following: abuse, improper use, negligence, accidents, lightning damage or other acts of God (i.e., hurricanes, earthquakes), modification, failure of the end-user to follow the 
directions outlined in the product instructions, failure of the end-user to follow the maintenance procedures written and recommended in the product instructions and service manual, or 
recommended by the International Security Industry Organization. Furthermore, Dotworkz Systems shall have no liability where a schedule is specified for regular replacement, maintenance or 
cleaning of certain parts (based on usage) that the end-user has failed to abide to such schedule; attempted repair by non-qualified personnel; operation of the Product outside of the published 
environmental and electrical parameters; if such Product's original identification (trademark, serial number) markings have been defaced, altered, or removed.  Dotworkz Systems excludes from 
warranty coverage Products sold AS IS and/or WITH ALL FAULTS and excludes used Products which have not been sold by Dotworkz Systems to the Purchaser. All software and accompanying 
documentation furnished with, or as part of the Product is furnished "AS IS" (i e., without any warranty of any kind), except where expressly provided otherwise in any documentation or license 
agreement furnished with the Product.

 

4.

PROOF OF PURCHASE: 

The purchaser’s dated bill of sale must be retained as evidence of the date of purchase and to establish warranty eligibility. 

DISCLAIMER OF WARRANTY 

EXCEPT FOR THE FOREGOING WARRANTIES, DOTWORKZ SYSTEMS HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, EXPRESSED OR IMPLIE D, INCLUDING, BUT NOT LIMITED TO ANY AND/OR 

ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY WARRANTY WITH REGARD TO ANY CLAIM OF 1NFRINGEMENT THAT MAY BE PROVIDED IN SECTION 2-312(3) OF THE UNIFORM COMMERCIAL 
CODE AND/OR IN ANY OTHER COMPARABLE STATE STATUTE. DOTWORKZ SYSTEMS HEREBY DISCLAIMS ANY REPRESENTATIONS OR WARRANTY THAT THE PRODUCT IS COMPATIBLE WITH ANY COMBINATION OF NON-V1DEOLARM PRODUCTS OR 
NON-DOTWORKZ SYSTEMS RECOMMENDED PRODUCTS THAT THE PURCHASER CHOOSES TO CONNECT TO THE PRODUCT.

 

LIMITATION OF LIABILITY 

THE LIABILITY OF DOTWORKZ SYSTEMS, IF ANY, AND PURCHASER'S SOLE AND EXCLUSIVE REMEDY FOR DAMAGES FOR ANY CLAIM OF ANY KIND WHATSOEVER, REGARDLESS OF THE LEGAL THEORY AND 

WHETHER ARISING IN TORT DP CONTRACT SHALL NOT BE GREATER THAN THE ACTUAL PURCHASE PRICE OF THE PRODUCT WITH RESPECT TO WHICH  SUCH CLAIM IS MADE. IN NO EVENT SHALL DOTWORKZ SYSTEMS BE LIABLE TO 
PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING BUT NOT LIMITED TO COMPENSATION, REIMBURSEMENT OR DAMAGES ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE 
PROFITS, OR FOR ANY OTHER REASON WHATSOEVER. 

Summary of Contents for D3 SERIES




















Reviews: