MV Agusta BRUTALE 910 S, Workshop Manual

Page: 98 / 112

- 82 -
Engine
B
Revision
Once you have disassembled the motor shaft and in
case there should be any doubt substitute the bench
bushings as well as the connecting rod.
Verify the motor shaft wear tolerance.
The function
play
of the
bench bearings
must be
between
0,012÷0,038 mm
.
Service limit is
0,06 mm
.
The function play of the
connecting rod bearing
must
be between
0,036÷0,061 mm
.
With a service limit of
0,08 mm
.
Reassembly
Carefully degrease and clean from any paste residues
Position the bushings into the carter without lubricat-
ing.
After having positioned them put oil on each bush.