MV Agusta BRUTALE 910 S, Workshop Manual

Page: 97 / 112

Engine
- 81 -
B
H)Separate the two carters (1 and 2) by manipulating
the protrusions.
I) If necessary remove the bearings (3).
L) Slide the motor shaft out.
In the event that the bushings should be temporarily
removed (4) it is a good idea to identify the bearing
number and its carter with a number using a marker.
For example the bushing removed from the n°1
bearing of the superior carter (starting from the left)
will be identified by the mark S1.
For the couplings refer to the groups they belong to
shown on the chart.
SELECTION TABLE FOR F4 BEARINGS
FUNCTIONING PLAY 0,012/0,038
BEDPLATE SLOT DIAMETER
A
38,103
B
38,112
38,111 38,119
BENCH
PIN
DIAMETER
A 34,981 1.546/1,551 1,550/1,555
34,988 BLUE YELLOW
B 34,989 1,542/1,547 1,546/1,551
34,997 RED BLUE
1
2
3