MV Agusta BRUTALE 750 ORO, Workshop Manual

Page: 333 / 386

Cooling system and lubrication system
2
ENGINE COOLANT EXTRACTION
Remove the ignition commutator cover unscrewing the
two fixing screws (1).
Open the cap of the expansion tank (2).
2
1
Empty the cooling system of the coolant as follows:
• Place under the engine a container to collect the
discharged coolant;
• Remove the discharge screw (1) situated on the water
pump (2);
• Make sure the coolant flows into the container.
Wait until all the engine coolant has dripped out of the
cooling system.
Recover the coolant in an appropriate vessel.
Do not drain liquid into the environment.
1
EXPANSION TANK REMOVAL
After having drained the cooling system, as described
in the previous paragraph, it is necessary to remove
the ignition switch you should remove the fuel tank
and the air filter compartment in advance as descri-
bed in the Chapter C “Superstructures”.
Then remove the ignition switch as follows:
Remove the ignition switch unscrewing the two fixing
screws (1).
- 5 -
L
1