MV Agusta BRUTALE 750 ORO, Workshop Manual

Page: 189 / 386

Electrical system
- 35 -
E
IGNITION/SIDE STAND SAFETY SYSTEM PARTS
CHECK
The safety system of the motorcycle is included into
the CPU.
Terminals 3, 4 and 5 of the 36-way coupling of CPU
are those involved.
Using a multi-tester, measure the voltage between the
terminals as indicated in the following table:
Apply 12 volts to the terminals (1) and (2) of the relay
and check the continuity between terminals B-M.
Do not apply the battery voltage to the starter relay
for more than five seconds to avoid overheating
and therefore damaging the winding.
- Using a multi-tester, check that the winding is on open
circuit or if a resistance is present. The winding is in
good condition if the value of the resistance revealed is
as indicated.
Starter relay resistance
Standard: 3-6 ohm
3
3 4 5
4
5
0,4-0,6 0,4-0,6
12 11 10 9 8 7 6 5 4 3 2 1
13 24 23 22 21 20 19 18 17 16 15 14
36 35 34 33 32 31 30 29 28 27 26 25