MV Agusta BRUTALE 750 ORO, Workshop Manual

Page: 96 / 386

- 82 -
Maintenance
B
Modifications to the display functions
Modifications can be made to the clock function, the
tripmeter function and the thermometer function. This
operation must be effectuated with the engine switched
on and the gears in neutral.
Clock (hours and minutes)
Repeatedly press the starter button until the visualisa-
tion of the hour appears.
Pressing the “SET” button, the first figure of the hour
starts to flash.
Press the starting button to adjust the digit; release
when the desired digit is reached.
To obtain the quick scrolling of the selected
digit, press and hold the engine starting but-
ton more than two seconds.
Repeat the procedure for the second figure of the hour,
for the first and second figures of the minutes.
Press the “SET” button to confirm the figures and to
interrupt the selection (the flashing).
Speedometer (k.p.h. – m.p.h.)
Repeatedly press the starter button until the visualisa-
tion of the “TOTAL” speedometer function.
Press the “SET” button. The measuring unit of the
speedometer starts to flash.
The instrumentation has an integral
memory which stores all parameters also
when the engine is off. Except for the clock,
which is set to zero, all parameters are in
memory also in case of battery disconnec-
tion.
N.B.
N.B.