Electrical system
- 43 -
E
LEFT DIRECTION INDICATOR
If the left direction indicator warning light does not func-
tion, there must be the presence of voltage input inter-
mittently between pin (13) and pin (20).
If the presence of input voltage is verified, the conti-
nuity between pin (13) of the instrument panel and pin
(5) of the left hand control connector must be checked.
RIGHT DIRECTION INDICATOR
If the right direction indicator warning light does not
function, there must be the presence of voltage input
intermittently between pin (14) and pin (20).
If the presence of input voltage is verified, the conti-
nuity between pin (14) of the instrument panel and pin
(7) of the right hand control connector must be
checked.
RPM INDICATOR
If the r.p.m. of the engine is not signalled on the instru-
ment panel with the engine switched on, check:
. The continuity between pin (16) of the instrument
panel and pin (20) of the CPU.
. If the cause is verified, the fault will be found in the
CPU.
In the case of substitution of the CPU: with
the ignition key in the “OFF” position wait
approximately fifteen seconds before
disconnecting the same.
SPEED SENSOR
If the speed of the motorcycle is not indicated on the
instrument panel, proceed as follows:
• Check the condition of the fuse 3.
N.B.
Summary of Contents for BRUTALE 750 ORO
