MV Agusta 2008 F4 312RR 1078, Workshop Manual

Page: 93 / 124

- 31 -
D
Crankcase
Revision
Once you have disassembled the motor shaft and in
case there should be any doubt substitute the bench
bushings as well as the connecting rod.
Verify the motor shaft wear tolerance.
The function
play of the bench bearings must be
between 0,012÷0,038 mm .
Service limit is 0,06 mm .
The function play of the connecting rod bearing must
be between 0,036÷0,061 mm .
With a service limit of 0,08 mm .
Reassembly
Carefully degrease and clean from any paste residues
Position the bushings into the carter without lubricat-
ing.
After having positioned them put oil on each bush.