MV Agusta 2008 F4 312RR 1078, Workshop Manual

Page: 82 / 124

- 20 -
Crankcase
D
Removing water pump
Work with cold motor.
Drain liquid.
A)Loosen the clamp and remove the coupling from the
cylinder group,being careful not to damage it.
B)Remove the screws ( 1 ) which fasten the pump body
to the bedplate.
C) Slide the pump out of the bedplate.
Scomposizione organi pompa acqua
After having extracted the pump from
the bedplate disassemble the pump as
follows:
A)Remove the tightening screws from
the pump body ( 1 ) and separate the
latter from the cap.
B)Remove the two O-Rings ( 2 )
C)Remove the two seeger rings ( 3 )
D)Unscrew the impeller ( 4 ).
E)remove the shaft ( 5 ) with the 1st
bearing ( 6 ).
During the following procedure
use the necessary precautions
so as not to get burned.
8
9
1
4
2
7
5
6
3