© MuxLab Inc.
6G-SDI Extender Over FIBER
Page 21
4.2.
USB Driver Setup
When interfacing a MuxLab device with the USB port
on Windows XP, Windows 7, Windows 8 or Windows
10 operating systems, a driver setup file will be required.
For Linux and Mac OS X operating systems, no driver is
necessary.
To install the USB serial driver, download the SC-
000032-A USB to serial driver file from the MuxLab
website and save it to the local hard drive. NOTE: If the
downloaded file is compressed, it will need to be
uncompressed before it may be utilized.
Plug the USB cable between the MuxLab device and the
PC, and power up the device. The
Found New
Hardware
wizard will open (see Figure 4). Select
Locate and install driver software (recommended)
.
Figure 4 Found New Hardware Wizard
