HDMI 8x8 Matrix Switch Kit, HDBT, PoC, 4K/60
Installation & Operation Manual
© MuxLab Inc. 2019
19
since you will need to change it back later on.
Step3.
With the PC communicating to the web interface of the Matrix Switch, set the
Matrix Switch’s network segment to the same as that of the Router or Ethernet
Switch.
Step4.
Set the PC to the same network segment of the Router or Ethernet Switch. If
the original one was already the same as the Router or Ethernet Switch, then
simply return the PC’s network segment to its original one you recorded
above.
Step5.
Connect the Matrix Switch and PC(s) to the Router or Ethernet Switch. PC(s)
within the LAN are able to then control the Matrix Switch through its web-
interface GUI.
5.3.5. Web-Interface GUI for TCP/IP control
The 500413 supports a web-interface GUI for convenient TCP/IP control. The GUI
allows users to interact with this Kit through graphical icons.
Type
http://192.168.1.239
in your browser, to bring up the web interface.
The following provides a brief introduction to the interfaces.
Sense Switch Screen:
The matrix grid displays all possible connections between each
input and output. Users can make connections by clicking on the corresponding grid
button.
See the screenshot below:
