MuxLab 500413, Installation & Operation Manual

Page: 17 / 25

HDMI 8x8 Matrix Switch Kit, HDBT, PoC, 4K/60 Installation & Operation Manual
© MuxLab Inc. 2019 17
Command Function
SET DHCP y
Set DHCP {y = [0-1] (0 = Dis, 1 =
Enable)}
GET RIP Get Route IP address
GET HIP Get Host IP address
GET NMK Get Net mask
GET TIP Get TCP/IP port
GET DHCP Get DHCP status
GET MAC Get MAC address
IR Route Setup Command
SET IRT OUTx IS INx
Set output x IR Route {x = [0-8] (0 =
All), y = [1-8]}
SET LIR EXT SW
x1.x2.x3.x4.x5.x6.x7.x8
Set Local IR Extender Switch {x1-x8 =
[0-1] (0 = Disable, 1 = Enable)}
SET CIR EXT SW
x1.x2.x3.x4.x5.x6.x7.x8
Set Callback IR Extender Switch {x1-
x8 = [0-1] (0 = Disable, 1 = Enable)}
GET IRT OUTx IS Get output x IR Route {x=[0-8] (0=All)}
GET LIR EXT SW Get Local IR Extender Switch Status
GET CIR EXT SW
Get Callback IR Extender Switch
Status
RS232 Route Setup Command
SET RS CHy MUX
x1.x2.x3.x4.x5.x6.x7.x8
Set the RS232 Mux {y= [1-8], x1-x8 =
[0-1] (0 = Disable, 1 = Enable)}
SET RS PTH OUTx LENy
BRz
Set RS232 Control Pass-Through to
Outputx {x = [0-8] (0 = All), y = [1 –
800], z = [0-5], (0=9600, 1=14400,
2=19200,
3=38400, 4=57600,
5=115200)}
GET RS CHx MUX
Get the RS232 MUX Status {x=[0-8]
(0=All)}
IR Code Setup Command
SET IR SYS xx.yy
Set IR Custom Code {xx=[00-FFH],
yy=[00-FFH]}
SET IR OUTx INy CODE zz
Set IR Data Code {x=[1-8], y=[1-8], zz
= [00-FFH]}
GET IR SYS Get IR Custom Code
GET IR OUTx INy CODE Get IR Data Code