HDMI 8x8 Matrix Switch Kit, HDBT, PoC, 4K/60
Installation & Operation Manual
© MuxLab Inc. 2019
13
5.2. IR Control
5.2.1. IR Remote
Users can control the 500413 through the included IR remote. Here is a brief
introduction to the IR remote.
①
Output Channels Selection
②
Input Channels Selection
5.3. RS232 Control
5.3.1. RS232 connection
The Matrix Switch can be controlled remotely through the RS232 communication
port. This RS232 communication port is a 3-pin phoenix connector.
5.3.2. Basic Settings
Begin by first connecting the Matrix Switch with an input and an output device. Then,
connect it to a computer, running the RS232 control software.
Please set the correct parameter for the COM port, and set the baud rate as 9600, data
bits as 8 bits, stop bit as 1 bit, and the parity bit to none, in order to be able to send
RS232 commands.
