HDMI 8x8 Matrix Switch Kit, HDBT, PoC, 4K/60
Installation & Operation Manual
© MuxLab Inc. 2019
10
System Connections
4.1. Safety Precautions
The system should be installed in a clean environment with temperature and humidity
levels within the specified operating range.
Ensure that all plugs, power cords and sockets are in good condition without signs of
damage.
All devices should be connected before turning on the power.
4.2. System Diagram
4.3. Connection Procedure
a)
Connect an HDMI source device (e.g. Blu-Ray player) to the
HDMI Input
connectors of the HDMI 8x8 Matrix Switch, with an HDMI cable.
b)
Connect up to eight (8) HDBT Receiver(s) to the HDBT Link output port(s) of the
HDMI 8x8 Matrix Switch, with a UTP Cable.
c)
An AVR amplifier with a digital coaxial cable may be connected using the digital
output ports.
d)
Connect the controlling device (e.g. PC) to the
RS232 Input
port of the HDMI
8x8 Matrix Switch.
e)
Connect a Patch cord from the router to the Ethernet port on Matrix Switch to
control the Matrix Switch using TCP/IP protocol.
f)
Connect an IR Sensor to the
IR Sensor
port, and an IR Emitter to the
IR
Emitter
port. The IR signal can be transmitted bi-directionally between the
HDMI 8x8 Matrix Switch and the HDBT Receiver(s).
