Audio Zone Amplifier 100W
Operation Manual
© MuxLab Inc. 2016
9
System Connection
4.
4.1. Safety Precautions
The system should be installed in a clean environment with typical room temperature
and humidity levels, within the specified operating range (see specifications).
All devices should be connected before turning on the power.
4.2. System Diagram
4.3. Connection Procedure
Step 1
Connect audio sources (such as CD, Blue-ray, DVD, media player, etc.) to
INPUT
ports of the device with audio cables;
Step 2
Set the Input Select to the correct source, and connect the audio output device(s)
(such as passive speakers) to the audio output port accordingly. Ensure that the
unit is not powered while connecting or disconnecting speakers.
Step 3
(Optional) Insert an IR receiver (5V, without carrier) to
IR Sensor
to enable IR
control.
Step 4
(Optional) Connect a control device (e.g. a PC) to
RS232
port to enable serial
control.
Step 5
(Optional) Connect a control device (e.g. a PC) to an Ethernet LAN and the
amplifier
TCP/IP
port to the same LAN to enable IP control.
Step 6
Plug 33VDC power adaptor to the power port of the amplifier.
