Audio Zone Amplifier 100W
Operation Manual
© MuxLab Inc. 2016
14
5.3 RS232 Control
The Audio Zone Amplifier 100W boasts a 3-pin pluggable terminal block for serial
control. The definition of the connector pinout is listed in the table below.
No.
Pin
Function
1
NC
Unused
2
Tx
Transmit
3
Rx
Receive
4
NC
Unused
5
Gnd
Ground
6
NC
Unused
7
NC
Unused
8
NC
Unused
9
NC
Unused
Connect the Audio Zone Amplifier 100W to the controlling device (e.g. a PC) with an
RS232 cable and set the parameters such that they match with the Audio Zone Amplifier.
The controlling device may use terminal emulation software to control the Audio Zone
Amplifier 100W.
5.3.1 Basic RS232 Settings
You can use a terminal software to control the 500217. Please set the parameters of the
COM Port (baud rate, data bit, stop bit and the parity bit) to 9600, 8, 1, none
(respectively).
