Audio Zone Amplifier 100W
Operation Manual
© MuxLab Inc. 2016
20
set the desired level.
Switch to the network configuration window by clicking on
NETWORK
Network Configuration:
Figure 5- 5 Network/Unit Settings Selection
In this window, the user can:
Configure network settings:
IP: support DHCP and Static IP, Choose the required state by clicking on the
DHCP button
DHCP: IP Address, subnet mask and gateway are fixed in this mode.
Static IP: set IP Address, subnet mask and gateway manually. Make sure the
IP is unique within the segment in question.
Modify password: type in a new password in the column, with a max of 5
numbers or letters
Inquire software version
Switch back to the audio selection window by clicking
AUDIO SEL
If there are any changes within a given window, they may be saved by pressing
Save
, or press
Cancel
to not accept the changes.
Clear the cache of the browser beforehand to ensure reliable GUI operation.
5.4.4 Port Management
Enter the Audio Zone Amplifier 100W IP Address 192.168.0.178:100 (Default,
changeable via GUI) into a web browser. Enter the correct username and password to
log in to the webserver interface:
