Audio Zone Amplifier 100W
Operation Manual
© MuxLab Inc. 2016
10
4.4 Audio Output Connection
4.4.1 Stereo output (default): 2x50 Watts @ 8
Ω
Set the switch to STEREO to enable 2x50 Watts @ 8
Ω for stereo output mode. Connect
the amplifier and speaker normally as shown in the figure below:
Figure 4- 1 Stereo Output Connection
4.4.2 Mono output: 1x100 Watts @ 4
Ω
Set the switch to MONO to enable to enable 1x100 Watts @ 4
Ω for mono output mode.
Connect the amplifier and speaker(s) as shown in the figure below:
Figure 4- 2 Mono Output Connection
Note:
In mono mode the user can also connect a MuxLab 70V transformer such as the
500755-70V to support 70V daisy-chained speaker systems. This is useful for longer
speaker runs in a distributed speaker environment.
