User’s Guide Rockhopper 3 Extreme
CHAPTER 6 : PRINTER MENU
77
AP-75198– Rev. 1.2
6 .3.2.2 [F 2]- C lea ning
While printing, it could be possible that some nozzles drop out, in that case, perform a little, normal or
powerful cleaning.
Please follow the steps below to perform a cleaning.
When there are some missing nozzles, a cleaning should be done. Depending on the quantity of missing
nozzles and which head, a little, normal or powerful cleaning on head 1-2, head 3-4 or ALL could be done.
Step 1 :
Press the [F2] key of the operation panel.
I)
To shift to the cleaning menu.
Step 2 :
Press the [F1] key or the [F2] key on the operation panel.
I)
The product will perform following operations:
Setup items
Key name
Parameters
Description
Cut & Feed
F1
ALL, Pump 1 Pump 2
Clean ALL heads or head couple one (pump 1) or
two (pump 2)
F2
Little, normal, powerful
Set the intensity of a cleaning
Step 3 :
Press the [ENTER] key to start the requested cleaning.
6 .3.2.3 [F 3]- A dj
usthea t
ers
While printing, the heater values can be changed. For example: when noticing cockling.
Please follow the steps below to adjust the heater temperatures.
Step 1 :
Press the [F3] key
Step 2 :
Following screen will be displayed
Step 3 :
Change the value of one or more heaters or switch them all off.
Notes
For more details about heater adjustment, pleas
e refer to Controlling the heater elements
Summary of Contents for Rockhopper 3 Extreme
