User’s Guide Rockhopper 3 Extreme
CHAPTER 3 : BASICS
28
AP-75198– Rev. 1.2
3.3 LOADING MEDIA
3.3.1 Loading roll media
Please refer to the User’s Guide of the Unwinder/Winder 100 or the T- winder to know how to load roll
media.
3.3.2 Loading sheet media
To load sheet media, follow the steps below.
Step 1 :
Power ON the printer.
Step 2 :
Unload media if necessary.
Step 3 :
Be sure that the pressure rollers are raised before loading sheet media.
Step 4 :
When no media is loaded and
•
the pressure rollers are raised, the following message will be displayed.
•
the pressure rollers are lowered, the following message will be displayed.
Step 5 :
Open the front cover.
Step 6 :
Load a sheet of media at the right side of the printer. Position the media next to the media setting
position (line of little holes in the media guide platform). The maximum distance between the
guideline and media is 5 mm.
Machine
Minimum Media Width
Maximum Media Width
Printing Width
65 machine
A4 (210 mm 8,27)
1651 mm (65.00)
1640 mm (64.56)
90 machine
A4 (210 mm 8,27)
2240 mm (88.18)
2230 mm (87.79)
Summary of Contents for Rockhopper 3 Extreme
