User’s Guide Rockhopper 3 Extreme
CHAPTER 6 : PRINTER MENU
72
AP-75198– Rev. 1.2
6.2 OPERATION PANEL IN STANDBY MODE
This section describes functions operated on the operational panel when the printer is in the normal status.
Notes
For information of the name and function of each key, refer to "Operation panel".
6.2.1 [F1] – Feeding, Cutting media and Step Adjust
When you want to feed media forward or backward, follow the steps below:
Step 1 :
Verify the following regarding the condition of the printer.
I)
It is not currently printing
Step 2 :
Press the [F1] key of the operation panel.
I)
To shift to the Cut&Feed menu.
Step 3 :
Press the [F3] key or the [F4] key on the operation panel.
I)
The product will perform following operations:
Setup items
Key name
Parameters
Description
Cut & Feed
F1
Cut
Cut media
F2
Dist.Adj.
Set step
F3
Forward
Feeds media forward.
F4
Backward
Feeds media backward.
Notes
If "Take-Up Roll" is set in the media detection setup menu, the product will not operate even if the [F4] key
has been pressed.
Summary of Contents for Rockhopper 3 Extreme
