������������
� � � ������ � � �
� � � ������ � � �
� � � ������ � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
��
��������������������������������������������
Wiring the AES/EBU and S/PDIF interfaces
Connect the AES/EBU interfaces with the help of balanced electrical cables
equipped with XLR connectors on both ends. The specifications stipulate a
specific cable resistance of 110
Ω
(ask your retailer for a confirmation of this
value when purchasing the cables).
Connect the coaxial S/PDIF interface with the help of unbalanced electri-
cal cables equipped with cinch connectors on both ends. The specifications
stipulate a specific cable resistance of 75
Ω
(ask your retailer for a confirma-
tion of this value when purchasing the cables).
Connect the optical S/PDIF interface with the help of Toshiba TOSLINK
compliant optical fiber cables. Here, you can use both plastic and glass
fiber-based cables. When using plastic fiber cables, lengths of 10 meters
should not be exceeded, so as to ensure the reliable transmission of signals.
Glass fiber cables can transfer data reliably even over greater distances.
12
MUTEC offers optical cables of various
lengths that have been specifically tested
for the transmission of S/PDIF and ADAT
signals (retailers and distributors only)!
Since some manufacturers offer optimized
cables for the transmission of digital S/PDIF
and AES/EBU audio signals, it will be a good
idea to ask your retailer for specific cables.
