Must EP33-1012TLV, User Manual

Page: 17 / 20

-15-
AC Mode Specification
AC parameter
Input waveform
Nominal input voltage
Max input voltage
Input frequency
Output waveform
Overload protection
Output short circuit
Efficiency(AC mode)
Transfer time AC TO DC
Transfer time DC TO AC
Pure sine wave
220Vac / 230Vac / 240Vac
270Vac MAX
50HZ/60HZ (auto sensing)
Same as input waveform
B software protection
software protection
>95%® load, full battery)
15ms(max)
15ms(max)
AC input voltage range: (±5V)
model
range
Low cutoff Low recover
High cutoff High recover
220V
F<65HZ
AC<265V
F<65HZ
AC<265V
F>70HZ
AC>270V
F>70HZ
AC>270V
F>45HZ
AC>150V
F>45HZ
AC>190V
F<40HZ
AC<140V
F<40HZ
AC<180V
narrow
wide
Charge Mode Specifications
Max charge current: (±5A)
model 1K 1.5K 2K 3K 4K 5K 6K
12V
24V
48V
30A 45A 60A
25A 30A 40A 60A
20A 30A 35A 40A
Min charge current 10A. change by every 5A.
Charge mode AC range:
Setting Low voltage Charge mode Charge mode
220V AC wide range
AC>265V
40<F<70HZ charge
recover
AC<155V
Stop charge
Stop charge
AC<260V
AC>160V
Charge recover
Charge recover
High voltage alarm
Save mode
Add +1V/battery: (high voltage one second one time/after 30s fault 03)
(13.8-14.5V) + 1V for 12V model
(27.6-29V) + 2V for 24v model
(55.2-58) + 4V for 48v model
Load≤40W(110V)/80W(220V)
20A