Mussana boy, Operating Instructions Manual

Page: 19 / 80

2
INSTALLING THE MACHINE AND THE MAINS
The Mussana Microtronic Cream Whipping Machine should be installed free-standing
on a fi rm, level surface. The distance between its side to other objects or walls should
be at least 5 cm, so that the heat removal functions perfectly. If an appliance such as a
deep fryer or oven, which produces heat, stands next to the cream whipping machine,
the distance away should be greater.
Please Note:
For USA and Canada:
REFERENCE THE MACHINE
Every Mussana Microtronic Cream Whipping Machine is fi tted as standard with a
pre-set
portion control mode through sensor buttons and equipped with intensive
refrigeration up to the decorating nozzle .
Our product conforms to the relevant EC standards .
The machine has been tested according to DIN 10507 for cream whipping machines.
Each appliance carries an individual series number for identifi cation of your machine.
The appliance can be connected to any correctly installed contact protected power
point with 230 Volt (50 Hz) alternating current. A 6.3 amp fuse is located on the in-built
electronic platform.
Too small a distance between them causes a reduction in
the refrigeration performance and extra burden on the
refrigeration unit.
The appliance cambe connected to any correctly installed contact protected power
point with 110 Volt (60Hz) alternating current. A 10 amp. fuse is located on the In-built
electronic platform.
B
C
English