Bluetooth mode
Turn on the headphone by switching the on/off button to the ON position. The BLUE
LED will flash quickly. Bluetooth works spontaneously, searching for previously paired
Bluetooth devices. If the headphone fails to connect, turn on your Bluetooth device to
search the headphone with the name
“Musicman BT-X24”
. PIN code is “0000”. After
pairing successfully, the BLUE LED is blinking slowly. When the headphone is
connected with your Smartphone and you receive an incoming call, you can press the
“PLAY” button to take the call. To reject the you have press the “PLAY” button again.
NOTE: To switch between the modes, keep the “PLAY” button pressed for about
one second. You will hear that the mode changes.
Bluetooth Camera Trigger mode
If you want to make a picture with your Smartphone, and use the headphone as
“Shutter” device, you have to enter the Bluetooth Trigger Function! Then press the
“PLAY” button (like described above) several times until you enter into the Bluetooth
Trigger Mode. Turn on Bluetooth of your mobile phone or another Bluetooth enabled
device and try to connect.
! ATTENTION:
For this function you have to “change” the Bluetooth mode.
Now you have to select the second Bluetooth name of the headphone
which is
“shutter”
!
Turn on the camera of the mobile phone or another Bluetooth enabled device. After
completed pairing, press shortly the “BACK” or “FORTH” button to take a picture.
NOTE:
Bluetooth Camera Trigger supports most Android or iOS mobile phones.
Bluetooth Camera Trigger controller button differs from phone to phone, some are
controlled by “BACK” while others by “FORTH”. Some phones cannot activate
Bluetooth Camera Trigger. It may due to camera protocol is not compatible.
MicroSD card mode
Insert the MicroSD card in the headphone MicroSD card slot (10) before you power it
on. Then press the “PLAY”
button several times until you enter into the MicroSD Card
Mode. The headphone will automatically play audio files from the MicroSD card
(MP3/WMA formats are supported), the BLUE LED will flash slowly when the
headphone plays music.
FM Radio Mode
Press the “PLAY” button several times until you enter into the FM Radio Mode. The
broadcast station search starts automatically. Located broadcast stations will be
saved automatically. To switch between broadcast stations press the “BACK” or
“FORTH” button shortly.
