You should now download the Musaic app to a
phone / tablet or PC connected to your home
network and see if you can control your Player.
Note:
You can change the default device name
for your Player in the Settings section of the
Musaic app (
see page 8
).
Note:
The Musaic Players use DHCP by default,
this is standard for most home networks where
DHCP (Dynamic Host Control Protocol) or
Dynamic IP is used to automatically assign a new
device a new IP address.
To run a network with static IP, you can browse
to the units IP address where you will find a
web-served interface, here you can then click
the ‘DHCP’ box to disable DHCP. You can then
use a specific IP address, subnet mask, default
gateway, primary DNS etc. Only do this if you
have the knowledge to setup such a system.
CHANGING BETWEEN
ETHERNET AND WI-FI
OR RE-STARTING SETUP
To change between a previously setup Wi-Fi
connection and Ethernet simply turn off the unit,
plug in the Ethernet cable and turn it back on.
To change between Ethernet and a previously
setup Wi-Fi connection simply turn off the unit,
remove the Ethernet cable and turn it back on.
If you want to change from one Wi-Fi
connection to another you can restart the
connection process as follows. Make sure the
unit is powered, turn it on from the top panel
Standby / On button, wait a few seconds then
press the small recessed Reset button on
the back panel for one second. The network
connections will be reset and you can start the
setup process again as per the Getting Started
section.
Your presets / memories and other settings will
be retained.
To perform a full factory reset press and hold
the Reset button for 15 seconds, all settings will
now be reset see section on Factory Reset at
end of this manual.
DOWNLOADING THE
MUSAIC APPS
In order to use the Musaic system you should
download one or more Musaic apps suitable for
the devices you have that are connected to the
same network as your Musaic Player or Players.
To use the Musaic apps you must have at
least one Musaic Player set up in your home,
connected to your network and turned on.
Apple iOS
Download the Musaic app for iPad / iPhone / iPod
touch to an Apple device that’s connected
to your Wi-Fi network. The app can be found
by tapping the App Store button on your iOS
device then searching for ‘Musaic’.
The Musaic app is compatible with iOS 8 and
higher. Certain features may require higher
versions of iOS.
Android
Download the Musaic app for Android phones
and tablets to an Android device that’s
connected to your Wi-Fi network. To use the
Musaic app you must have at least one Musaic
Player set up in your home and turned on. The
app can be found by tapping the Google Play
button on your Android device then searching
for ‘Musaic’.
Musaic app is compatible with Android 4.1 and
higher. Certain features may require higher
versions of Android.
SOFTWARE UPDATES
Your Musaic system can be updated over the
internet as new features become available.
When you open the Musaic app you will be
notified if an update is available. Follow the
instructions on the screen to update the Musaic
Player and / or your Musaic app as necessary.
10
© Musaic Ltd. October 2015
