17
SPANN-BoX
®
Size 0
SPANN-BoX
®
Size o is delivered in the
untensioned state. the tension core must
be pressed into the casing and locked.
!
.
Remove the locking pin from the bottom
of the casing
4
.
"
.
Press the tension core
3
right down
into the casing and with the lock pin
4
in
hole
5
.
§
.
Position SPANN-BoX
®
at the desired
place on the machine and decide on the
location of the drill holes.
$
.
Drill holes for M 6 screws and mount
SPANN-BoX
®
with two fixing screws
6
.
%
.
to start, press glide profile
1
down
lightly and remove the lock pin
4
.
&
.
Keep lock pin safe
4
on underside of
the casing.
1
Gleitprofil
2
optische Kontrollanzeige
3
Spannkern
4
Arretierstift
5
Bohrung für Arretierstift
6
Befestigungsschrauben
7
Befestigungsbohrungen
1
Glide profile
2
Visual indicator
3
tension core
4
lock pin
5
Hole for lock pin
6
Fixing screws
7
Fixing holes
WaRnIng
Risk of injury
through components under
spring tension! Do not loosen the locking
screws when you have taken out the
springs. the components are under
spring tension and can burst out of the
casing.
nOTE
the holes in the casing allow for an
adjustment of the SPANN-BoX
®
up to
25 mm. If the SPANN-BoX
®
comes into
regular contact with water or similar,
the lock pin should not be kept on the
bottom of the housing, since it can rust.
