2
F-041019C
TABLE OF CONTENTS
WARRANTY
2
SAFE OPERATING PRACTICES
3
ASSEMBLY
5
OPERATING INSTRUCTIONS
6
MAINTENANCE AND STORAGE
9
REPAIR PARTS
12
ONE YEAR LIMITED WARRANTY
Murray, Inc. warrants to the original purchaser that this unit shall be free from defects in material and workmanship under
normal use and service for a period of
One (1) Year
from the date of purchase; however, this warranty does not cover engines,
accessories (such as electric starters) and Normal Wear Parts (except as noted below) as the companies that manufacture
these items furnish their own warranties and provide service through their authorized field service facilities. For additional
information, see the warranties covering these particular parts. If you are uncertain whether your unit contains or is equipped
with one or more of these parts, consult your dealer prior to purchase. Subject to the terms and conditions noted in this Limited
Warranty, we shall, at our option, repair or replace at no cost to the original purchaser any part covered by this Limited
Warranty during the applicable warranty period.
Normal Wear Parts are defined as drive belts, augers, shear pins, tires and headlights. These parts are warranted to be free
from defects in material and workmanship as delivered with the product. Any claim for repair or replacement of Normal Wear
Parts must be made within thirty (30) days of the date of purchase. No claims involving damage caused from material use,
abuse or misuse will be honored.
This Murray, Inc.
One (1) Year Limited Warranty
is your exclusive remedy; however, this warranty is void or does not apply to
any unit that has been tampered with, altered, misused, abused or used for rental or other commercial and/or professional
(non-homeowner) uses. Your warranty does not cover minor mechanical adjustments which are not due to any defect in
material or workmanship. For assistance in making such adjustments, consult your Instruction Book.
To make a claim under this Murray, Inc.
One (1) Year Limited Warranty
, return the unit (or if authorized in advance, the
defective part) along with your proof of purchase to an Authorized Service Center near you. To locate the nearest Authorized
Service Center, call the Central Parts Distributor for your area shown in the list provided with your unit or check the Yellow
Page listings in your local telephone directory. If you return the entire unit, we will repair the unit. If we authorize the return of
the defective part only, we will either replace or repair the part.This Murray, Inc.
One (1) Year Limited Warranty
gives you
specific legal rights, and you may also have other rights which vary from state to state.
This Limited Warranty is given in lieu
of all other expressed and implied warranties including the implied warranty of merchantability and warranty of
fitness for a particular purpose.
If you need additional information on this written warranty or assistance in obtaining service,
write:
MURRAY CANADA, INC.
Factory Customer Service
1195 Coutneypark Drive East
Mississauga, Ont. L5T-1R1
1-800-661-6662
Thank you for purchasing this Snowthrower. Care for your Snow-
thrower properly and it will provide you with satisfactory, labor-
saving performance.
This operator’s manual has been prepared to provide you with
the information necessary for safe operation and proper mainte-
nance. To gain a complete understanding of the Snowthrower,
read this manual thoroughly. Before operating familiarize yourself
with the location of controls, operating procedures, and general
maintenance instructions.
FOLLOW THE SAFE OPERATING INSTRUCTIONS to insure
proper Snowthrower operating and to prevent possible injury to
yourself or others.
Thank you again for selecting this Snowthrower as your labor-
saving tool for snow removal. If you have any questions about
your Snowthrower or if you desire parts and service, contact your
authorized service dealer. He is prepared with service parts and
technical knowledge to care for your particular needs.
PRODUCT SPECIFICATIONS
RATING:
120 V.A.C. 6.5 AMPS, 60 HZ
CLEARING WIDTH:
15”
CLEARING HEIGHT:
7”
WARNING: The motor is equipped with a protector that
will disconnect power to the motor temporarily if the
snow thrower is overworked, and will automatically
reset as the motor cools. If the motor stops, release the control
bar, disconnect the extension cord and allow the motor to cool 5
minutes before continuing operation.
