A Murrelektronik Company
3
1. CONCERNING THIS MANUAL
The text, illustrations, diagrams and examples used in this manual exist solely for the purpose of explaning the operation and usage
of xtremeDB Input/Output modules. If you have any further questions regarding the installation and set-up of the equipment de-
scribed in this manual, please do not hesitate to contact us. We will be glad to assist you. Murrelektronik reserves the right to make
technical changes or modifications to this manual without prior notice.
2. SAFETY INFORMATION
2.1 DESIGNATED USE
The input/output modules of the XtremeDB series are designated for use only in those areas as described in this manual. Strict
adherence to the data specified in this manual must be ensured. The products have been developed, manufactured, tested and
documented in compliance with currently valid safety codes. The equipment poses no danger to operating personnel or material if
configuration, assembly and operation are performed in compliance with the stated handling and safety regulations. Unqualified
intervention in the hardware and software of our equipment, disregard of warning labels found on the equipment or non-observance
of the information in this manual can result in injury or serious damage to man and/or material. Any application or usage beyond
and above this shall be regarded as non-designated.
Warning!
Good chemical and oil resistance. When using aggressive mediums, material resistance based on application
must be checked.
2.2 TARGET GROUPS
This manual addresses itself exclusively to qualified and trained electricians knowledgeable in the safety standards of automation
technology. Only a qualified, trained electrical tradesman knowledgeable in the safety standards of mobile industry may perform
configuration, installation, set-up, maintenance and testing of the equipment.
2.3 REGULATIONS
Current safety and accident prevention laws valid for a specific application must be observed in the configuration, installation, setup,
and maintenance and testing of the equipment.
2.3.1 GENERAL INFORMATION
a) The designated function of this equipment is guaranteed only if the conditions for installation, system extension,
operation and maintenance are complied with.
b) Only system accessories and cables are allowed that meet the requirements and regulations for safety, electromagnetic
compatibility and, where applicable, telecommunications transmission equipment and specifications.
The installation of other accessories may violate these requirements and regulations or damage the equipment.
Information concerning the type of authorized system extensions and cables can be obtained from your Murrelektronik
distributor or taken from this manual.
c) The designated operation of the equipment is guaranteed only with the housing fully installed.
d) This product is designed and manufactured to assure protection against damage and hazards if designated usage and
proper maintenance are observed.
2.4 LICENSE DISCLAIMER
EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN OTHER DAMAGES:
To the maximum extent permitted by applicable law, in no event shall Murrelektronik be liable for any special, incidental, indirect, or
consequential damages whatsoever (including, but not limited to, damages for loss of profits or confidential or other information, for
business interruption, for personal injury, for loss of privacy, for failure to meet any duty including of good faith or of reasonable care,
for negligence, and for any other pecuniary or other loss whatsoever) arising out of or in any way related to the use of or inability to
use the software product, the provision of or failure to provide support services, or otherwise under or in connection with any pro
