Instruction manual for devices of the MASI20 series
2
V 1.0
1 Safety information
1.1 Designated use
The input and output modules of the MASI20 series are designated for use only in those areas as
described in this manual.
Strict adherence to the data specified in this manual must be ensured. The products avec been
developed, manufactured, tested and documented in compliance with current safety codes.
The equipment poses no danger to operating personnel or material if configuration, assembly and
operation are performed in compliance with the stated handling and safety regulations.
Unqualified intervention in the hardware and software of our equipment, disregard of warning labels found
on the equipment or non-observance of the information in this product manual can result in injury or
serious damage to man and/or material.
Only supplementary or extension devices that have been recommended by Murrelektronik may be
employed in conjunction with products of the MASI20 series.
Any application or usage beyond and above this shall be regarded as non-designated.
1.2 Target groups
This manual addresses itself exclusively to qualified and trained electricians knowledgeable in the safety
standards of automation technology.
Only a qualified, trained electrical tradesman knowledgeable in the safety standards of automation
technology may perform configuration, installation, set-up, maintenance and testing of the equipment.
Only Murrelektronik technical personnel are allowed to undertake intervention in the hardware and
software of our equipment, insomuch as this is not described in this manual.
