Instruction manual for devices of the MASI20 series
V 1.0
23
3.6.2 Wiring a load on a static transistor output
Some modules of the MASI20 family have static outputs (transistor) and loads must be connected in the
following way :
O0
O1
O2
O3
0V
RL
RL
RL
RL
Fig 3-12 :
wiring a static transistor output
Refer to the wiring plan printed on the side of the product.
By commuting big capacitive load it is possible that the module indicate a periphery
fault due to the switching down delay.
3.6.3 Wiring a load on a relays output
Some modules of the MASI20 family have relays outputs and loads must be connected in the following
way :
O0
O1
O2
O3
C
RL
RL
RL
RL
AC/DC
C
Fig 3-13 :
Wiring a relays output
Refer to the wiring plan printed on the side of the product.
