Muratec MFX-C2700, Configuration Manual

Page: 72 / 119

Advanced network settings > 72
6. Enter a Name and a Description and then click Next .
7. Clear the Activate the default response rule (earlier versions of Windows
only). check box and then click Next .
8. Select Edit properties and then click Finish .
9.
On the IP security policy properties window, select the
General
tab.
10. Click Settings .
11. On the Key Exchange Settings window, enter the value (minutes) in
Authenticate and generate a new key after every .
12. Click Methods .
13. On the Key Exchange Security Methods window, click Add .
14. Specify Integrity algorithm , Encryption algorithm , and Diffie-Hellman group .
15. Click OK .
16. On the Key Exchange Security Methods window, click OK .
17. On the Key Exchange Settings window, click OK .
18. On the IP security policy properties window, select the Rules tab.
19. Click Add .
20. On the Security Rule Wizard , click Next .
21. On the Tunnel Endpoint screen, make sure that This rule does not specify a
tunnel is selected and then click Next .
22. On the Network Type screen, make sure that All network connections is
selected and then click Next .
23. On the IP Filter List screen, click Add .
24. On the IP Filter List window, click Add .
25. On the IP Filter Wizard , click Next .
26.
On the
IP Filter Description and Mirrored Property
screen, click
Next
.
27. On the IP Traffic Source screen, click Next .
28. On the IP Traffic Destination screen, click Next .
29. On the IP Protocol Type screen, click Next .
30. Click Finish .
31.
On the
IP Filter List
wizard, click
OK
.
32. On the Security Rule Wizard , select the new IP filter from the list and then click
Next .
33. On the Filter Action screen, click Add .
NOTE
Specify the same value as Life time specified in the configuration for “Phase1
Proposal” in
“Configuring your machine” on page 71 . Although Life time is
specified by seconds, enter a value by minutes in this step.
NOTE
Select the same value specified in IKE Encryption Algorithm, IKE Hash
Algorithm, and Diffie-Hellman group in the configuration for “Phase1
Proposal” in
“Configuring your machine” on page 71 .