Muratec MFX-C2700, Configuration Manual

Page: 31 / 119

Configuring the fax settings > 31
A
UTOMATIC REDIAL
You can set the fax to automatically redial if the initial fax transmission fails. The machine
will redial on:
> Line busy
> No answer
> Communication error
To set auto-redial:
1. Press the SETTING button on the control panel.
2. Using the Down arrow key, scroll to
Admin Setup
and press OK .
3. Using the arrow keys and on-screen keypad, enter the Administrator password.
Highlight
Done
and press OK .
4. Using the Down arrow key, scroll to
Fax Setup
and press OK .
5. Using the Down arrow key, scroll to
Other Settings
and press OK .
6. Press OK to select the
Redial Tries
.
7. Using the keypad, enter the required number of redial attempts (between 0 and 9),
then press OK to confirm.
8. Using the Down arrow key, scroll to
Redial Interval
and press OK .
9.
Using the keypad, enter the required redial interval (between 1 and 5 minutes), then
press OK to confirm.
10. Press the Left arrow key to exit the menu.
R
ECEPTION MODE
You can change the way your MFP handles incoming fax transmissions and telephone calls
(if you have a telephone handset connected) depending on your office requirements.
Choose from:
>
Fax Ready Mode
> Tel/Fax Ready Mode
> Ans/Fax Ready Mode
> Tel Ready Mode
> DRD
To change the reception mode:
1. Press the SETTING button on the control panel.
2. Using the Down arrow key, scroll to
Admin Setup
and press OK .
3. Using the arrow keys and on-screen keypad, enter the Administrator password.
Highlight
Done
and press OK .
4. Using the Down arrow key, scroll to
User Install
and press OK .
5. Using the Down arrow key, scroll to
Reception Mode
and press OK .
6. Using the arrow keys, select the required reception mode and press OK .
7. Press the Left arrow key to exit the menu.
The machine behaviour differs depending on the specified reception mode, refer to the
User’s Guide for details.