Getting Started
_ 29
Setting job timeout
When there is no input for a certain period of time, the machine exits the
current location. You can set the amount of time the machine will wait.
1.
Press
Machine Setup
on the control panel.
2.
Press
Admin Setting
.
3.
When the login message appears, enter password with number keypad
and press
OK
. (See "Setting the authentication password" on page 28.)
4.
Press the
General
tab.
5.
Press
Timers
.
6.
Select
System Timeout
.
•
You can set the
Held Job Timeout
option to over one hour.
7.
Select
On
.
8.
Select a duration using left/right arrows.
9.
Press
OK
.
Using energy saving feature
The machine provides energy saving features.
1.
Press
Machine Setup
on the control panel.
2.
Press
Admin Setting
.
3.
When the login message appears, enter password with number keypad
and press
OK
. (See "Setting the authentication password" on page 28.)
4.
Press the
General
tab.
5.
Press down arrow to switch the screen, press
Power Saver
.
6.
Select appropriate option and time.
•
Scan Power Save
: Turns off the scanner lamp under the glass.
•
Low Power Save
: Keeps the temperature of the fuser unit under
100 °C, and turns off the fans within the machine except a core fan
for the fuser unit.
•
Power Save
: Turns off all the fans even for the fuser unit after
certain time.
7.
Press
OK
.
Setting the default tray and paper
You can select the tray and paper you would like to keep using for printing
job. (See "General settings" on page 73.)
1.
Press
Machine Setup
on the control panel.
2.
Press
Admin Setting
.
3.
When the login message appears, enter password with number keypad
and press
OK
. (See "Setting the authentication password" on page 28.)
4.
Press the
General
tab.
5.
Press the down arrow to switch the screen and press
Tray
Management
.
6.
Select tray and its options such as paper size and type.
7.
Press
OK
.
Changing the default settings
You can set the default values for copy, fax, email, scan and paper all at
once.
1.
Press
Machine Setup
on the control panel.
2.
Press
Admin Setting
.
3.
When the login message appears, enter password with number keypad
and press
OK
. (See "Setting the authentication password" on page 28.)
4.
Press the
General
tab >
Default Settings
>
Default Option
.
5.
Press the function you want to change, and change its settings.
For example, if you want to change the default setting of the brightness
& darkness for a copy job, press
Copy
>
Darkness
and adjust the
brightness & darkness.
6.
Press
OK
.
Using the SetIP program
This program is for the network IP setting using the MAC address which is
the hardware serial number of the network printer card or interface.
Especially, it helps the network administrator set several network IPs at the
same time.
The following procedure is based on windows XP. If you use Macintosh or
Linux OS, see
Software section
Installing the program
1.
Insert the driver CD provided along with your machine. When the driver
CD runs automatically, close the window.
2.
Start
Windows Explorer
and open the X drive. (X represents the name
of your CD-ROM drive.)
3.
Double-click
Application
>
SetIP
.
4.
Open the folder of the language you plan to use.
5.
Double-click
Setup.exe
to install this program.
6.
Follow the onscreen instructions to complete the installation.
If the optional tray is not installed, the tray options on the screen is
grayed out.
•
You can only use
SetIP
program when your machine is connected
to a network.
•
The following procedure is based on the Windows XP operating
system. If you are using Macintosh or Linux, See
Software section.
•
http://
developer.apple.com/networking/bonjour/download/
, select the
program Bonjour for Windows due to your computer operating
system, and install the program. This program will allow you to fix
the network parameter automatically. Follow the instruction in the
installation window. This Bonjour program does not support Linux
•
You can only use
IPv4
setting for
SetIP
.
Summary of Contents for M F X - 5 5 5 5
Page 12: ...11...
