110 _
Installing accessories
6.
Replace the control board cover.
7.
Reconnect the power cord and printer cable, and turn the machine on.
Activating the added memory in the PS printer
properties
After installing the memory module, you need to select it in the printer
properties of the PostScript printer driver in order to use it.
1.
Make sure that the PostScript printer driver is installed on your
computer. For details about installing the PS printer driver, see
Software
section
.
2.
Click the Windows
Start
menu.
3.
For Windows 2000, select
Settings
and then
Printers
.
For Windows XP/2003, select
Printers and Faxes
.
For Windows Vista, select
Control Panel
>
Hardware and Sound
>
Printers
.
4.
Select the
Muratec MFX-4555
Series PS
printer.
5.
Click the right mouse button on the printer icon and select
Properties
.
6.
Select
Device Settings
.
7.
Select the amount of memory you installed from
Printer Memory
in the
Installable Options
section.
8.
Click
OK
.
REPLACING THE STAPLER
When the stapler is completely empty, the message for installing the staple
cartridge appears on the display screen.
1.
Open the finisher cover.
2.
Pull the stapler unit out.
3.
Lift the empty staple cartridge from the stapler unit.
4.
Unpack the new staple cartridge.
5.
Place the staple cartridge back into the stapler unit.
6.
Slide the stapler unit in until it locks in place.
7.
Close the finisher cover.
Summary of Contents for M F X - 5 5 5 5
Page 12: ...11...
