Figure 8.6.1.3
Figure 8.6.1.3 shows the
System
tab contents, corresponding to Bank 1. The current values of each parameter are dis-
played and can be updated by selecting from the drop-down menu or entering data from the keyboard, and then pressing
the
Apply Changes
button. Note that Bank 1 holds configuration parameters for the base only except for
Broadcast Mode,
which applies to both the base and the remotes.
Figure 8.6.1.4
Figure 8.6.1.5 shows the
Status
tab contents, corresponding to Bank 2. Note the
Status
tab contains read-only parame-
ters.
©2012 by Murata Electronics N.A., Inc.
DNT90M Integration Guide (2012/09/17)
Page 59 of 74
www.murata.com
