manualshive.com logo in svg

Muonio SE1, Manual

Share
Download
Muonio SE1 Manual Download Page 15

Software Settings

RELAY SETTINGS PAGE

BLINK - by pressing this button the relay board will blink several times if it is 
connected to the network. This is to identify each relay board if you have multiple 
boards connected to the network. This command is not guaranteed to go 
through. 

EDIT - Allows you to change the name of the SE1 relay board.  
REMOVE - Removes the SE1 device from the network. The SE1 board must be 
online for this command to execute.  
Relays 1,3,4,5 can be selected for each heating/cooling zone. Typically Relay 1 is 
used for triggering the boiler (or heat pump). But if there are no domestic hot 
water zone or no auxiliary call wiring strategies in place it can be used as the other 
three relays. 
SETUP EXAMPLE: If you want to set up a zone that brings on a zone pump and the 
boiler simultaneously, connect the boiler to relay 1 and the zone pump to relay 3, 
4 or 5. Then select relay 1 and the relay you connected the zone pump to in the 
relay settings page for that particular zone.  
If there is no cooling required in the system leave the cooling relays unselected. If 
the boiler for heating is selected for relay 1 then no cooling can be connected to 
relay 1. However, if a heat pump is triggered via relay 1 it may be that the same 
relay is used for heating and cooling. In that case the heat pump and the Muonio 
software have to be switched between heating and cooling twice a year.(Typically 
twice a year).

Relay 2 is reserved for domestic hot water only, see next page for more 
information. 
Before exiting this menu SAVE the settings and manually test if all relays are 
connected to correct pumps, valves, boilers, etc... You can do this using the 
manual switches as described above.   

FIGURE 16. RELAY SETTINGS

SE1 SETT INGS

SETUP BOARD

REMOVE

EDIT

BLINK

HOT WATER

YES

NO

RELAY 1 CALL

YES

NO

ZONE 1 KITCHEN

RELAY 1

RELAY 2 

HOT WATER 

RELAY3

RELAY 5

RELAY 4

RELAY 1

RELAY 2 

HOT WATER 

RELAY3

RELAY 5

RELAY 4

HEATING 

COOLING

ZONE 2 LIVING ROOM H EATING

RELAY 1

RELAY 2 

HOT WATER 

RELAY3

RELAY 5

RELAY 4

RELAY 1

RELAY 2 

HOT WATER 

RELAY3

RELAY 5

RELAY 4

HEATING 

COOLING

ZONE 3 KIDS ROOM H EATING

RELAY 1

RELAY 2 

HOT WATER 

RELAY3

RELAY 5

RELAY 4

RELAY 1

RELAY 2 

HOT WATER 

RELAY3

RELAY 5

RELAY 4

HEATING 

COOLING

ZONE 4 BEDROOM HEATING

RELAY 1

RELAY 2 

HOT WATER 

RELAY3

RELAY 5

RELAY 4

RELAY 1

RELAY 2 

HOT WATER 

RELAY3

RELAY 5

RELAY 4

HEATING 

COOLING

Summary of Contents for SE1































Reviews:

No comments

Brands by name

Popular brands

Load more brands