9
© Munters Corporation, August 2021
QM1077r16
Step 3
Attach Prop Sheave to Hub using (4) Bolt [F], Washer [G] and Nut [H].
See Figure 3A.
Attach Prop Adapter
to Prop Sheave/Hup Assembly using (4) Bolt [C], Washer [D] and Nut [E].
See Figure 3B.
Step 4
Rotate Tube Strut on saw horses so Motor Bracket is pointing up. Slide Shaft Shield [M] over hub shaft
as shown in
Figure 4.
Attach Sheave/Hub Assembly to Tube Strut using (1) Hex Nut [L] and tighten to
52 ft-lbs [70 N-m] torque.
See Figure 4.
Place Plastic Cover Cap [N] over Hex Nut and fasten in place
with (1) Tapping Screw [B].
See Figure 4.
Set aside the Strut Assembly for use in a later step.
Shaft Shield [M]
Hex Nut [L]
Cap Cover [N]
Tapping screw [B]
Figure 4
Installation Instructions
Chapter 2
Hub Assembly
Prop Sheave
Hub
Bolt [F]
Washer [G]
Nut [H]
Prop Sheave
with Hub
Nut [E]
Bolt [C]
Washer [D]
Prop Adapter
Figure 3A
Figure 3B
