© Munters Corporation, August 2021
14
QM1231r10
Installation Instructions
Chapter 2
Figure 11A
Step 11A
Install cone onto fan by putting top of cone over top of fan. The hole in tab of one cone section should
slide down over the Frame Pin in the Main Frame assembly. Allow remainder of cone to slide over orifice
panel making sure Cone Support Brackets remain on outside of cone.
See Figure 11A.
Frame Pin
Hole in Tab of Cone Section
Step 11B
Place end of Cone Support Bracket with slot over bolt holding Cone/Strut Mounting Bracket to the orifice
and secure with Nut [G].
See Figure 11B
.
Secure Cone to Fan installing Medium Bolt [E] through the
remaining hole in the Cone Support Bracket and fastening with Nut [G]. A long screwdriver may be
needed to help align the holes through Cone Support Bracket, Cone, Main Frame and Orifice. Repeat
process for all 4 Cone Support Brackets.
See Figure 11B.
Figure 11B
Nut [G]
Medium Bolt [E]
Nut [G]
Use this hole for WM36F
Use this hole for WM54F
